 |
|
| Download Brochures |
|
|
|
 |
| Aluminium Coping Systems |
Our Meridian coping system offers an attractive, low maintenance capping to parapet and perimeter walls. Designed to “snap” onto pre-fixed brackets the system is simple to install yet both rigidly and secretly fixed.
As all systems are designed specifically for each project, material thickness, width, depth and appearance vary to suit each individual application. There are three standard variations available all with the same easy fit bracket system that enables quick installation and complete surface protection.
Material thickness can vary from 16g (1.6mm) to 10g (3.0mm) depending on width and application. As with all of the Dales Fabrication range our office based and field based staff are available to assist you with your design.
A full list of Standard Colours is available (click here to see a full list of standard colours ) that can either match or compliment the wall finish and both our coating and design are covered by the same standard warranties and insurances that come with the whole Dales product range. |
|
|
Standard Coping
Due to the water resistant joint detail utilised for the Meridian Coping System the profile does not need to slope in section. The standard section is particularly popular for gable parapet walls. |
 |
|
|
Weather-Struck Coping
Sloped to replicate traditional stone and concrete capping systems. |
 |
|
|
Ridgeway Coping
Sloped in two directions to replicate traditional stone and concrete capping systems. |
 |
|
|
Additional Information
A full range of accessories are available to suit all of our coping systems. Click for more information including installation guide.
Please contact our technical services department for copings in excess of 500mm wide or on exposed sites as these require special consideration. |
 |
|
|
Accessories
A wide range of standard components are available, however Dales are able to offer purpose made components to suit individual project requirements. |
|
|
|
|
|
|
